Menu item DescriptionConfigure LogEnable AuditYesNoEnable Remote SyslogNoYesRemote Syslog Facility0–23Severity of events to log0–7Specifies whether and how the audit logs of print jobs are created:• Enable Audit determines if the printer records events in the secure audit log andin the remote syslog.• Enable Remote Syslog determines if the printer sends logged events to a remoteserver.• Remote Syslog Facility determines the facility value that the printer uses whensending events to the remote syslog server.• “Severity of events to log” specifies how critical a logged event is. With this logactivated, the printer logs each event with a severity value equal to or less thanthe setting value.0 is Emergency1 is Alert2 is Critical3 is Error4 is Warning5 is Notice6 is Informational7 is DebugNotes:• Yes is the factory default setting for Enable Audit.• No is the factory default setting for Enable Remote Syslog. If Enable Audit is setto No, then no records are sent to the remote syslog even if Enable RemoteSyslog is set to Yes.• 4 - Security is the factory default setting for Remote Syslog Facility.• 4 is the factory default setting for Severity of events to log.Set Date/Time menuMenu item DescriptionView Date/Time Lets you view the current date and time settings for the printer. The format for thedate and time is: YYYY-MM-DD HH:MM:YYYY is the four-digit yearMM is a two-digit monthDD is a two-digit dateHH is a two-digit hourMM is a two-digit minuteSet Date/Time Lets you enter the date and timeNote: Date/Time is set in YYYY-MM-DD HH:MM format.Time Zone
Lets you select the time zoneNote: GMT is the factory default setting.Observe DSTOnOffSets the printer to use the applicable Daylight Saving Time (DST) start and end timesassociated with the printer Time Zone setting.Note: On is the factory default setting.Understanding printer menus97
