Source or process Print side Paper orientationMultipurpose feederSimplex (one-sided)printingPreprinted letterheaddesign is placed faceup.The top edge of the sheet with the logo should enter themultipurpose feeder first.Multipurpose feeder(duplex printing)Preprinted letterheaddesign is placedfacedown.The top edge of the sheet with the logo should enter themultipurpose feeder last.Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable forlaser printers.Tips on using transparenciesPrint samples on the transparencies being considered for use before buying large quantities.When printing on transparencies:• Feed transparencies from the standard 250-sheet tray or the multipurpose feeder.• Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to ensuretransparencies are able to withstand temperatures up to 175°C (350°F) without melting, discoloring, offsetting,or releasing hazardous emissions.Note: Transparencies can be printed at a temperature up to 180°C (356°F) if Transparency Weight is set to Heavyand Transparency Texture is set to Rough. Select these settings using the Embedded Web Server, or from theprinter control panel Paper menu.• To prevent print quality problems, avoid getting fingerprints on the transparencies.• Before loading transparencies, fan the stack to prevent sheets from sticking together.Printing56
