Menu item DescriptionView Address Shows the assigned AppleTalk addressNote: The address can be changed only from the Embedded Web Server.Set Zonenetwork>Provides a list of AppleTalk zones available on the networkNote: The default setting is the default zone for the network. If no default zoneexists, the zone marked with an * is the default setting.NetWare menuThis menu is available from the Network/Ports menu:Network/Ports Network Menu Network Setup NetWareMenu item DescriptionActivateYesNoActivates or deactivates NetWare supportNote: No is the factory default setting.View Login Name Shows the assigned NetWare login nameNote: This can be changed only from the Embedded Web Server.Print Mode Shows the assigned NetWare print modeNote: This can be changed only from the Embedded Web Server.Network Number Shows the assigned NetWare network numberNote: This can be changed only from the Embedded Web Server.Select SAP FramesEthernet 802.2Ethernet 802.3Ethernet Type IIEthernet SNAPEnables the Ethernet frame type settingNotes:• On is the factory default setting for all menu items.• Values for each of the Ethernet frame types are On and Off.Packet BurstYesNoReduces network traffic by allowing the transfer and acknowledgement ofmultiple data packets to and from the NetWare serverNote: Yes is the factory default setting.NSQ/GSQ ModeYesNoSpecifies the NSQ/GSQ Mode settingNote: Yes is the factory default setting.Understanding printer menus90
