Paper menuDefault Source menuMenu item DescriptionDefault SourceTray MP FeederManual PaperManual EnvSets a default paper source for all print jobsNotes:• From the Paper menu, Configure MP must be set to Cassette in order forMP Feeder to appear as a menu setting.• Tray 1 (standard tray) is the factory default setting.• Only an installed paper source will appear as a menu setting.• A paper source selected by a print job will override the Default Sourcesetting for the duration of the print job.• If the same size and type of paper are in two trays and the Paper Size andPaper Type settings match, the trays are automatically linked. When onetray is empty, the job prints using the linked tray.Paper Size/Type menuMenu item DescriptionTray SizeA4A5A6JIS B5ExecutiveFolioLegalLetterOficio (Mexico)StatementUniversalSpecifies the paper size loaded in each trayNotes:• Letter is the US factory default setting. A4 is the international factorydefault setting.• If the same size and type of paper are in two trays and the Paper Size andPaper Type settings match, then the trays are automatically linked. Themultipurpose feeder may also be linked. When one tray is empty, the jobprints using paper from the linked tray.• The A6 paper size is supported only in Tray 1 and the multipurposefeeder.Note: Only installed trays and feeders are listed in this menu.Understanding printer menus75
