Menu item DescriptionParallel with ENAENA AddressENA NetmaskENA Gateway• ENA Address sets the network address information for an external print serverthat is attached to the printer using a parallel cable• ENA Netmask sets the netmask information for an external print server that isattached to the printer using a parallel cable• ENA Gateway sets the gateway information for an external print server that isattached to the printer using a parallel cableNote: Parallel with ENA is available only if the printer is attached to an external printserver through the parallel port.SMTP Setup menuUse the following menu to configure the SMTP server.Menu item DescriptionPrimary SMTP GatewayPrimary SMTP Gateway PortSecondary SMTP GatewaySecondary SMTP Gateway PortSpecifies SMTP server and port informationNote: 25 is the factory default setting for each SMTP Gateway Port menuitem.SMTP Timeout5–30Specifies the amount of time in seconds before the server stops tryingto send the e-mailNote: 30 seconds is the factory default setting.Reply Address Specifies server information. This is a required item.Note: The message box has a limitation of 512 characters.Use SSLDisabledNegotiateRequiredSets the printer to use SSL for increased security when connecting to theSMTP serverNotes:• Disabled is the factory default setting for Use SSL.• When the Negotiate setting is used, your SMTP server determines ifSSL will be used.SMTP Server AuthenticationNonePlain (Simple)CRAM MD5Digest MD5NTLMKerberos 5Specifies the type of user authentication required for scan to e-mailprivilegesNote: None is the factory default setting.Understanding printer menus94
