4-26 Service ManualMPF pick roll assembly removal2. Remove the E-clip (A) securing the MPF print roll assembly to the machine.3. Remove the plastic washer (B).4. Remove the MPF pick roll assembly.Replacement Warning: When replacing the MPF pick roll assembly, do not touch the rubber surface.MPF pick solenoid assembly removalNote: The MPF lift plate assembly can be detached and allowed to hang by the harness. The connection doesnot need to be disconnected.3. Remove the six screws (A) securing the metal cover to the machine.B AA1. Remove the media turn guide. See “Media turn guide removal” on page 4-12.1. Remove the MPF lift plate assembly. See “MPF lift plate assembly removal” on page 4-25.X656)” on page 4-123 or “Side cover, left removal (model X658)” on page 4-123.2. Remove the side cover, left. See “Side cover, left removal (models X651, X652/5535dn, X654, and
