Repair information 4-77ADF transport drive motor bracket assembly w/cable removal2. Remove the ADF transport drive motor bracket tension spring (A).3. Remove the wires from the retaining clip (B) on top of the bracket.4. Disconnect the ADF transport drive motor harness.5. Remove the two screws (C) securing the ADF transport drive motor bracket assembly with cable to theADF feed motor bracket.6. Slide the ADF transport drive motor bracket to the right, loosening the transport belt.7. Remove ADF transport drive motor bracket assembly with cable.ADF feed drive motor assembly removal2. Unfasten and remove all wires from the ADF feed drive motor assembly.3. Disconnect the ADF feed motor harness from the feed motor.4. Remove the E-clip (A) securing one end of the ADF feed / pick roll feed shaft to the ADF feed drive motorassembly.C B A1. Remove the ADF cover, rear. See “ADF cover, rear removal” on page 4-65.1. Remove the ADF transport motor bracket assembly with cable. See “ADF transport drive motor bracketassembly w/cable removal” on page 4-77.
