Repair information 4-57Transfer roll bracket assembly, left removal3. Remove the screw (A) securing the transfer roll bracket assembly, left to the machine.4. Remove the transfer roll bracket assembly, left.5. Remove the roll clamp (B) from the transfer roll bracket assembly, left.6. Remove the bushing (C).7. Remove the spring (D).8. Remove the screw (E).9. Remove the ground wire (F).Replacement Warning: When reinstalling the transfer roll bracket assembly, left, ensure that the bushing (C),spring (D), and ground wire (F) are properly replaced.Transfer roll bracket assembly, right removal1. Remove the transfer roll assembly. See “Transfer roll assembly removal” on page 4-56.2. Remove the inner deflector. See “Inner deflector removal” on page 4-17.2. Remove the inner deflector. See “Inner deflector removal” on page 4-17.1. Remove the transfer roll assembly. See “Transfer roll assembly removal” on page 4-56.
