Spanning Tree | 163Displaying STP, MSTP, and RSTP OperationUse the show interface ethernet unit/slot/port command to display STP, MSTP, and RSTP BPDUstransmitted and received.Figure 10-126. Example Output from show interface ethernet CommandForce10 #show interface ethernet 1/0/1Type........................................... NormalAdmin Mode..................................... DisablePhysical Mode.................................. AutoPhysical Status................................ DownSpeed.......................................... 0 - NoneDuplex......................................... N/ALink Status.................................... DownMAC Address.................................... 0001.E8D5.BBDENative Vlan.................................... 1!--------------------------------!802.3x Pause Frames Transmitted................ 0GVRP PDUs received............................. 0GVRP PDUs Transmitted.......................... 0GVRP Failed Registrations...................... 0GMRP PDUs Received............................. 0GMRP PDUs Transmitted.......................... 0GMRP Failed Registrations...................... 0STP BPDUs Transmitted.......................... 0STP BPDUs Received............................. 0RSTP BPDUs Transmitted......................... 0RSTP BPDUs Received............................ 0MSTP BPDUs Transmitted......................... 0MSTP BPDUs Received............................ 0EAPOL Frames Transmitted....................... 0EAPOL Start Frames Received.................... 0Time Since Counters Last Cleared............... 0 day 0 hr 11 min 10 sec
