Quality of Service | 187Policy Attribute Table Size—The current number of entries (rows) in the Policy Attribute Table.Policy Attribute Table Max—The maximum allowed entries (rows) for the Policy Attribute Table.Service Table Size—The current number of entries (rows) in the Service Table.Service Table Max—The maximum allowed entries (rows) for the Service Table.The following examples show sample output from the show diffserv and show diffserv service briefcommands.Figure 12-144. Using the show diffserv CommandFigure 12-145. Using the show diffserv service brief CommandUsing the “show policy-map” CommandThe command displays all configuration information for the specified policy.The following values can be displayed:Assign Queue—Directs traffic stream to the specified QoS queue. This allows a traffic classifier to specifywhich one of the supported hardware queues are used for handling packets belonging to the class.Conform CoS—The action to be taken on conforming packets per the policing metrics.Conform Secondary CoS—The action to be taken on packets conforming with the secondary class of servicevalue per the policing metrics.Command Syntax Command Mode Usageshow policy-map [policyname |interface]Policy Class This command displays all configuration information forthe specified policy. The policyname is the name of anexisting DiffServ policy. The interface is an existinginterface.Force10 #show diffservDiffServ Admin mode............................ EnableClass Table Size Current/Max................... 3 / 25Class Rule Table Size Current/Max.............. 4 / 150Policy Table Size Current/Max.................. 1 / 64Policy Instance Table Size Current/Max......... 2 / 576Policy Attribute Table Size Current/Max........ 2 / 1728Service Table Size Current/Max................. 48 / 400Force10 #show diffserv service briefDiffServ Admin mode............................ EnableInterface Direction OperStatus Policy Name----------- ----------- ---------- -------------------------------1/0/1 In Up pm-11/0/2 In Down pm-11/0/3 In Down pm-1!-------------output deleted---------!
