176 | Link Aggregationw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Verify the status of the LAG as dynamic created through LACP:Figure 11-134. Displaying Details on a LAG with the show interface port-channel CommandDisplaying LAGs (Port Channels)In SFTOS v. 2.5.1, the show port-channel all command is replaced by the show interface port-channelcommand. An example of the show interface port-channel 1-128 option is shown in Figure 11-134,above. The show interface port-channel brief version is shown in Figure 11-135.Figure 11-135. Displaying LAGs with the show interfaces port-channel brief CommandForce10 (Config)#exitForce10#show interface port-channel 2Description....................................MAC Address.................................... 00:01:E8:D5:A0:81MTU............................................ 1518Packets RX and TX 64 Octets.................... 0Packets RX and TX 65-127 Octets................ 0Packets RX and TX 128-255 Octets............... 0Packets RX and TX 256-511 Octets............... 0Packets RX and TX 512-1023 Octets.............. 0Packets RX and TX 1024-1518 Octets............. 0Packets RX and TX 1519-1522 Octets............. 0Packets RX and TX 1523-2047 Octets............. 0Packets RX and TX 2048-4095 Octets............. 0Packets RX and TX 4096-9216 Octets............. 0Jabbers Received............................... 0Fragments Received............................. 0Undersize Received............................. 0Alignment Errors............................... 0FCS Errors..................................... 0Overruns....................................... 0Unicast Packets Received....................... 0--More-- or (q)uitForce10#show interface port-channel briefCodes: L - LACP Port-channelLAG Status Ports--- ------ -------1 Up 1/0/3 (Up)1/0/4 (Up)1/0/5 (Up)
