Dell OptiPlex GX240 User Manual

Also see for GX240 - OptiPlex Pentium 4 1.8GHz 512MB 40GB CD Win2K: Service manual Setup and quick reference guide Setup and quick reference guide

Contents

Dell OptiPlex GX240 User Manual Manual pdf 145 page image

Installing Upgrades 143Installing a CD, CD-RW, or DVD Drive and Reattaching Cables1 If the replacement drive does not have the bracket rails attached,remove the rails from the old drive by removing the two screws thatsecure each rail to the drive. Attach the bracket to the new drive byaligning the screw holes on the drive with the screw holes on thebracket rails and tightening all four screws (two screws for each rail).C D / D V D D r i v e B r a c k e t R a i l s2 Gently slide the drive into place until the tabs securely click intoposition.3 On the small form-factor computer, connect the interposer board tothe CD/DVD drive.If your computer came with a CD drive, use the spare connector onthe existing interface cable. Otherwise, use the IDE interface cableprovided in the drive kit.Ensure that the interposer board tab fits securely under the notch onthe inside of the cover.1 drive2 bracket rails (2)3 screws (4)132