Configuring System Information 105The following is an example of the PoE CLI commands.power inlineusage-thresholdConfigures the threshold for triggering alarmspower inlinetraps enableEnables PoE device trapsshow power inline[ethernetinterface ]Displays PoE configuration informationConsole# show power inlinePower: OnNominal Power: 150 WattsConsumed Power: 120 Watts (80%)Usage Threshold: 95%Traps: EnabledPort Powered Device State Priority Status Classification [W]---- -------------- ----- -------- ------ ------------------1/e1 IP Phone Model A Auto High On 0.44 – 12.952/e1 Wireless APModelAuto Low On 0.44 – 3.843/e1 Auto Low Off N/AConsole# show power inline ethernet 1/e1Port Powered Device State Priority Status Classification [W]---- -------------- ----- -------- ------ ------------------1/1e IP Phone Model A Auto High On 0.44 – 12.95Overload Counter: 1Short Counter: 0Denied Counter: 0Absent Counter: 0Invalid Signature Counter: 0Table 6-16. System Health CLI Commands (continued)CLI Command Description
