306 Configuring Switch Informationw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Dynamic — Assigns a port to a VLAN based on the host source MAC address connected tothe port.PVID — Assigns a VLAN ID to untagged packets. The possible values are 1-4095. VLAN 4095 isdefined as per standard and industry practice as the Discard VLAN. Packets classified to theDiscard VLAN are dropped.Frame Type — Packet type accepted on the port. Possible values are:Admit Tag Only — Only tagged packets are accepted on the port.Admit All — Both tagged and untagged packets are accepted on the port.Ingress Filtering — Enables or disables Ingress filtering on the port. Ingress filtering discardspackets that are destined to VLANs of which the specific port is not a member.Current Reserved VLAN — The VLAN currently designated by the system as the reserved VLAN.Reserve VLAN for Internal Use — The VLAN selected by the user to be the reserved VLAN if notin use by the system.Assigning Port Settings1 Open the VLAN Port Settings page.2 Select the port to which settings need to be assigned from the Port drop-down menu.3 Complete the remaining fields on the page4 Click Apply Changes.The VLAN port settings are defined, and the device is updated.Displaying the VLAN Port Table1 Open the VLAN Port Settings page.2 Click Show All.The VLAN Port Table opens.
