278 Configuring Switch Informationw w w . d e l l . c o m | s u p p o r t . d e l l . c o m The following is an example of the CLI commands:console(config)# spanning-treeconsole(config)# spanning-tree mode rstpconsole(config)# spanning-tree priority 12288console(config)# spanning-tree hello-time 5console(config)# spanning-tree max-age 12console(config)# spanning-tree forward-time 25console(config)# exitconsole# show spanning-treeSpanning tree enabled mode MSTPDefault port cost method: shortGathering information ..........###### MST 0 Vlans Mapped: 16-4094CST Root ID Priority 20480Address 00:30:ab:00:00:08Path Cost 4Root Port ch2This switch is the IST masterHello Time 2 sec Max Age 20 sec Forward Delay 15 secBridge ID Priority 32768Address 00:00:00:16:00:64Max hops 20Name State Prio.Nbr Cost Sts Role PortFast Type---- ----- ------- ---- --- ---- ------- ----1/e2 enabled 128.2 100 DSBL Dsbl No P2p Intr1/e3 enabled 128.3 100 DSBL Dsbl No P2p Intr1/e4 enabled 128.4 100 DSBL Dsbl No P2p Intr1/e5 enabled 128.5 19 FRW Desg Yes P2p Intr
