Configuring Switch Information 307Defining VLAN LAGs SettingsThe VLAN LAG Settings page provides parameters for managing LAGs that are part of a VLAN.VLANs can either be composed of individual ports or of LAGs. Untagged packets entering thedevice are tagged with the LAGs ID specified by the PVID. To open the VLAN LAG Settings page,click Switch→VLAN→LAG Settings in the tree view.Figure 7-32. VLAN LAG SettingsThe VLAN LAG Settings page contains the following fields:LAG — The LAG number included in the VLAN.LAG VLAN Mode — The LAG VLAN mode. Possible values are:General — The LAG belongs to VLANs, and each VLAN is user-defined as tagged oruntagged (full 802.1Q mode).Access — The LAG belongs to a single, untagged VLAN.Trunk — The LAG belongs to VLANs in which all ports are tagged (except for one port thatcan be untagged).PVE Promiscuous — The LAG belongs to a PVE Promiscuous VLAN.PVE Community — The LAG belongs to a PVE Community VLAN.PVE Isolated — The LAG belongs to a PVE Isolated VLAN.Dynamic — Assigns a LAG to a VLAN based on the host source MAC address connected tothe LAG.
