Configuring Switch Information 239Action on Violation — The action to be applied to packets arriving on a locked port. The possiblefield values are:Forward — Forwards the packets from an unknown source, however, the MAC address is notlearned.Discard — Discards the packets from any unlearned source. This is the default value.Shutdown — Discards the packet from any unlearned source and shuts down the port. Portsremained shut down until they are reactivated, or the device is reset.Trap — Enables traps being sent when a packet is received on a locked port.Trap Frequency (1-1000000) — The amount of time (in seconds) between traps. The default valueis 10 seconds.Defining a Locked Port1 Open the Port Security page.2 Select an interface type and number.3 Define the fields.4 Click Apply Changes.The locked port is added to the Port Security Table, and the device is updated.Displaying the Port Security Table1 Open the Port Security page.2 Click Show All.The Port Security Table opens:NOTE: Locked Ports are defined in the Port Security Table.Figure 7-8. Port Security Table
