50 Installing the PowerConnect 3424/P and PowerConnect 3448/Pw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Unpacking the DeviceNOTE: Before unpacking the device, inspect the package and immediately report any evidence of damage.1 Place the box on a clean flat surface.2 Open the box or remove the box top.3 Carefully remove the device from the box and place it on a secure and clean surface.4 Remove all packing material.5 Inspect the device and accessories for damage. Report any damage immediately.Mounting the DeviceThe following mounting instructions apply to The PowerConnect 3424/P and PowerConnect3448/P devices. The Console port is on the back panel. The power connectors are positioned on theback panel. Connecting a Redundant Power Supply (RPS) is optional, but is recommended.The RPS connector is on the back panel of the devices.Installing in a RackCAUTION: Read the Safety Information included in the Product Information Guide for safetyinformation on devices connected to or that support the SWI.CAUTION: Disconnect all cables from the unit before mounting the device in a rack or cabinet.CAUTION: When mounting multiple devices into a rack, mount the devices from the bottom up.
