278 BigIron RX Series Configuration Guide53-1002253-01Configuring LLDP9Syntax: show lldp neighbors detail [ports ethernet | all]If you do not specify any ports or use the keyword all, by default, the report will show the LLDPneighbor details for all ports.You can list all of the ports individually, use the keyword to to specify ranges of ports, or acombination of both. To apply the configuration to all ports on the device, use the keyword allinstead of listing the ports individually.LLDP configuration detailsThe show lldp local-info command displays the local information advertisements (TLVs) that will betransmitted by the LLDP agent.NOTEThe show lldp local-info output will vary based on LLDP configuration settings.The following shows an example report.A backslash (\) at the end of a line indicates that the text continues on the next line.The fields in the above output are described in the individual TLV advertisement sections in thischapter.Syntax: show lldp local-info [ports ethernet | all]If you do not specify any ports or use the keyword all, by default, the report will show the localinformation advertisements for all ports.You can list all of the ports individually, use the keyword to to specify ranges of ports, or acombination of both. To apply the configuration to all ports on the device, use the keyword allinstead of listing the ports individually.This field... Displays...Neighbor The source MAC address from which the packet was received, and the remaining TTL for theneighbor entry.BigIron RX#show lldp local-info ports ethernet 4/1Local port: 4/1+ Chassis ID (MAC address): 000c.dbfa.f900+ Port ID (MAC address): 000c.dbfa.f900+ Time to live: 120 seconds+ System name : "RX8"+ Port description : "10GigabitEthernet4/1"+ System capabilities : bridge, routerEnabled capabilities: router+ 802.3 MAC/PHY : auto-negotiation supported, but disabledOperational MAU type : 10GigBaseSR+ Link aggregation: not capable+ Maximum frame size: 1522 octets+ Port VLAN ID: 1+ Management address (IPv4): 8.8.8.1
