BigIron RX Series Configuration Guide 64353-1002253-01Configuring MSDP mesh groups 23Displaying peer informationTo display MSDP peer information, use the following CLI method.Syntax: show ip msdp peerThis display shows the following information.TABLE 106 MSDP peer informationThis field... Displays...Total number of MSDP peers The number of MSDP peers configured on the BigIron RXIP Address The IP address of the peer’s interface with the BigIron RXState The state of the MSDP router’s connection with the peer. The state canbe one of the following:• CONNECTING – The session is in the active open state.• ESTABLISHED – The MSDP session is fully up.• INACTIVE – The session is idle.• LISTENING – The session is in the passive open state.Keep Alive Time The keep alive time, which specifies how often this MSDP router sendskeep alive messages to the neighbor. The keep alive time is 60 secondsand is not configurable.Hold Time The hold time, which specifies how many seconds the MSDP router willwait for a KEEPALIVE or UPDATE message from an MSDP neighborbefore deciding that the neighbor is dead. The hold time is 90 secondsand is not configurable.Keep Alive Message Sent The number of Keep Alive messages the MSDP router has sent to thepeer.BigIron RX# show ip msdp peerTotal number of MSDP Peers: 2IP Address State1 206.251.17.30 ESTABLISHEDKeep Alive Time Hold Time60 90Message Sent Message ReceivedKeep Alive 2 3Notifications 0 0Source-Active 0 640Last Connection Reset Reason:Reason UnknownNotification Message Error Code Received:UnspecifiedNotification Message Error SubCode Received:Not ApplicableNotification Message Error Code Transmitted:UnspecifiedNotification Message Error SubCode Transmitted:Not ApplicableTCP Connection state: ESTABLISHEDLocal host: 206.251.17.29, Local Port: 8270Remote host: 206.251.17.30, Remote Port: 639ISentSeq: 16927 SendNext: 685654 TotUnAck: 0SendWnd: 16384 TotSent: 668727 ReTrans: 1IRcvSeq: 45252428 RcvNext: 45252438 RcvWnd: 16384TotalRcv: 10 RcvQue: 0 SendQue: 0
