BigIron RX Series Configuration Guide 61953-1002253-01Displaying PIM Sparse configuration information and statistics 23Displaying candidate RP informationTo display candidate RP information, enter the following command at any CLI level.This example show information displayed on a BigIron RX that is a candidate RP. The followingexample shows the message displayed on a BigIron RX that is not a candidate RP.BigIron RX(config-pim-router)# show ip pim rp-candidateThis system is not a Candidate-RP.Syntax: show ip pim rp-candidateThis display shows the following information.Next bootstrap message in NOTE: Indicates how many seconds will pass before the BSR sends itsnext Bootstrap message.NOTE: This field appears only if this BigIron RX is the BSR.Next Candidate-RP-advertisementmessage inIndicates how many seconds will pass before the BSR sends its nextcandidate PR advertisement message.NOTE: This field appears only if this BigIron RX is a candidate BSR.RP Indicates the IP address of the Rendezvous Point (RP).NOTE: This field appears only if this BigIron RX is a candidate BSR.group prefixes Indicates the multicast groups for which the RP listed by the previousfield is a candidate RP.NOTE: This field appears only if this BigIron RX is a candidate BSR.Candidate-RP-advertisement period Indicates how frequently the BSR sends candidate RP advertisementmessages.NOTE: This field appears only if this BigIron RX is a candidate BSR.This field... Displays...Candidate-RP-advertisement in Indicates how many seconds will pass before the BSR sends its next RPmessage.NOTE: This field appears only if this BigIron RX is a candidate RP.RP Indicates the IP address of the Rendezvous Point (RP).NOTE: This field appears only if this BigIron RX is a candidate RP.This field... Displays...BigIron RX(config-pim-router)# show ip pim rp-candidateNext Candidate-RP-advertisement in 00:00:10RP: 207.95.7.1group prefixes:224.0.0.0 / 4Candidate-RP-advertisement period: 60
