BigIron RX Series Configuration Guide 82753-1002253-01Displaying BGP4 information 26Displaying the active BGP4 configurationTo view the active BGP4 configuration information contained in the running configuration withoutdisplaying the entire running configuration, enter the following command at any level of the CLI.BigIron RX# show ip bgp configrouter bgplocal-as 200neighbor 102.102.1.1 remote-as 200neighbor 102.102.1.1 ebgp-multihopneighbor 102.102.1.1 update-source loopback 1neighbor 192.168.2.1 remote-as 100neighbor 200.200.2.2 remote-as 400neighbor 1000:2::1:1 remote-as 200neighbor 2000:1::1:2 remote-as 400neighbor 4444::1 remote-as 300address-family ipv4 unicastno neighbor 1000:2::1:1 activateno neighbor 2000:1::1:2 activateno neighbor 4444::1 activateexit-address-familyaddress-family ipv4 multicastexit-address-familyaddress-family ipv6 unicastredistribute staticneighbor 1000:2::1:1 activateneighbor 2000:1::1:2 activateneighbor 4444::1 activateexit-address-familyend of BGP configurationSyntax: show ip bgp configDisplaying summary neighbor informationTo display summary neighbor information, enter a command such as the following at any level ofthe CLI.Sent The number of BGP4 routes that the device has sent to the neighbor.ToSend The number of routes the device has queued to send to this neighbor.TABLE 124 BGP4 summary information (Continued)This field... Displays...
