Table 41: Component LEDs on the Services Gateway (continued)Possible Causes and CorrectiveActionsMeaningStateLEDNormal condition. No action isrequired.The Mini-PIM is present and detectedby the device.GreenMini-PIM LEDSee the “Monitoring the ServicesGateway Using Chassis AlarmConditions” topic under RelatedTopics.The Mini-PIM is not present or is notdetected by the device.OffNormal condition. No action isrequired.The port is inactive.OffVoice Interface LEDNormal condition. No action isrequired.The port is active and functioningnormally.Green (Steady)Normal condition. No action isrequired.The port is active and not ready fordata communication.AmberNormal condition. No action isrequired.The port is active and datacommunication is taking place.Green (Blinking)Normal condition. No action isrequired.The port is initializing.NOTE: The Voice Interface port LEDglows red (blinking) while initializing.If there is an error, the LED remains red;otherwise, the LED changes to green.Red (blinking)contact Dell Support. See ““DellSupport”” on page 115.The Port has detected a hardwareinitialization failure.Red (steady)Related Topics Monitoring the J-SRX210 Services Gateway Chassis Using the CLI on page 107•• Monitoring the J-SRX210 Services Gateway Using Chassis Alarm Conditions on page 111• Monitoring the J-SRX210 Services Gateway Power System on page 113• Using the Reset Config Button on the J-SRX210 Services Gateway on page 114• Changing the Reset Config Button Behavior on the J-SRX210 Services Gateway onpage 114• Dell Support on page 115Monitoring the J-SRX210 Services Gateway Using Chassis Alarm ConditionsWhen the services gateway detects an alarm condition, the alarm LED on the front panelturns red or amber as appropriate.To view a more detailed description of the cause of the alarm , issue the show chassisalarms CLI command.111Chapter 18: Monitoring the J-SRX210 Services Gateway
