NOTE: The 2-Port FXS/2-Port FXO Mini-PIM and the 4-Port FXO Mini-PIM do not supportfailover relay between any of the FXS and FXO ports.• Telephony interface expansion available through Mini-PIM interface card option includesa 2–Port FXS/2–Port FXO Mini-PIM, 4–Port FXO Mini-PIM, and an IP Flex T1/E1 Mini-PIMwith initial support for T1-CAS (loopstart only).NOTE: For more information on Mini-PIMs, see the J-SRX Series Services Gateways forthe Branch Physical Interface Modules Hardware Guide.Related Topics About the J-SRX210 Services Gateway with Integrated Convergence Services on page 35•• J-SRX210 Services Gateway Integrated Convergence Services Interoperability onpage 38• Configuring the J-SRX210 Services Gateway with Integrated Convergence Services onpage 39J-SRX210 Services Gateway with Integrated Convergence Services InteroperabilityThe J-SRX210 Services Gateway with Integrated Convergence Services aligns with theopen convergence architecture and supports different brands of call servers and SIPphones.Table 18 on page 38 summarizes the SIP phones, softphones, and analog devicessupported by J-SRX210 Services Gateway with Integrated Convergence Services.Table 18: J-SRX210 Services Gateway Integrated Convergence ServicesInteroperabilityDevicesPhone Types• Avaya 4600 and 9600 series• Polycom 300 and 500 series• Snom 300 series• Microsoft OCS-compatible phones• Cisco Unified SIP phones 7960 and 7961SIP phones• SNOM 360• Microsoft OCS client• X-Lite EyeBeam Mini-SIP• Avaya one-xSoftphonesAny analog device connected through FXO includingphones, fax machines, PBX or key systems, voice mailor answering machine, and analog paging systems.Analog devices38PowerConnect J-SRX210 Services Gateway Hardware Guide
