J-SRX210 Services Gateway Laser and LED Safety Guidelines and WarningsThe 1-Port SFP Mini-Physical Interface Module (Mini-PIM) is equipped with lasertransmitters, which are considered a Class 1 Laser Product by the U.S. Food and DrugAdministration, and they are evaluated as a Class 1 Laser Product per EN 60825–1 +A11+A2 requirements.This topic includes the following sections:• Laser and LED Safety Guidelines and Warnings on page 130Laser and LED Safety Guidelines and WarningsGeneral Laser Safety GuidelinesWhen working around Mini-PIMs, observe the following safety guidelines to prevent eyeinjury:• Do not look into unterminated ports or at fibers that connect to unknown sources.• Do not examine unterminated optical ports with optical instruments.• Avoid direct exposure to the beam.WARNING: Unterminated optical connectors can emit invisible laser radiation. The lensin the human eye focuses all the laser power on the retina, so focusing the eye directlyon a laser source—even a low-power laser—could permanently damage the eye.Class 1 Laser Product WarningWARNING: Class 1 laser product.Waarschuwing Klasse-1 laser produkt.Varoitus Luokan 1 lasertuote.Attention Produit laser de classe I.Warnung Laserprodukt der Klasse 1.Avvertenza Prodotto laser di Classe 1.Advarsel Laserprodukt av klasse 1.Aviso Produto laser de classe 1.¡Atención! Producto láser Clase I.Varning! Laserprodukt av klass 1.130PowerConnect J-SRX210 Services Gateway Hardware Guide
