• Other countries—International Electromechanical Commission (IEC) 60364, Part 1through Part 7• Evaluated to the TN power system• Locate the emergency power-off switch for the room in which you are working so thatif an electrical accident occurs, you can quickly turn off the power.• Do not work alone if potentially hazardous conditions exist anywhere in your workspace.• Never assume that power is disconnected from a circuit. Always check the circuit beforestarting to work.• Carefully look for possible hazards in your work area, such as moist floors, ungroundedpower extension cords, and missing safety grounds.• Operate the services gateway within marked electrical ratings and product usageinstructions.• For the services gateway and peripheral equipment to function safely and correctly,use the cables and connectors specified for the attached peripheral equipment, andmake certain they are in good condition.Related Topics J-SRX240 Services Gateway Definition of Safety Warning Levels on page 99•• J-SRX240 Services Gateway General Safety Guidelines and Warnings on page 101• J-SRX240 Services Gateway Fire Safety Requirements on page 105• J-SRX240 Services Gateway Installation Safety Guidelines and Warnings on page 106• J-SRX240 Services Gateway Laser and LED Safety Guidelines and Warnings on page 110• J-SRX240 Services Gateway Maintenance and Operational Safety Guidelines andWarnings on page 113J-SRX240 Services Gateway Agency ApprovalsThe services gateway complies with the following standards:• Safety• CSA 60950-1 (2003) Safety of Information Technology Equipment• UL 60950-1 (2003) Safety of Information Technology Equipment• EN 60950-1 (2001) Safety of Information Technology Equipment• IEC 60950-1 (2001) Safety of Information Technology Equipment (with countrydeviations)119Appendix A: Safety and Regulatory Compliance Information
