The J-SRX240 Services Gateway has a serial number ID label located on the back of thechassis and an agency label on the bottom of the chassis as shown in Figure 18 on page 136.Figure 18: Location of J-SRX240 Serial Number and Agency LabelsMini-Physical Interface Module Serial Number LabelMini-Physical Interface Modules (Mini-PIMs) are field-replaceable on the J-SRX240Services Gateway. Each Mini-PIM has a unique serial number. The serial number label islocated on the right side of the Mini-PIM, when the Mini-PIM is horizontally oriented (asit would be installed on the device).The exact location might be slightly different on different Mini-PIMs, depending on theplacement of components on the Mini-PIM.Packing the J-SRX240 Services Gateway and Components for ShipmentPacking the Services GatewayTo pack the services gateway for shipment:1. Retrieve the shipping carton and packing materials in which the device was originallyshipped. If you do not have these materials, contact your Dell Support representativeabout approved packaging materials.2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist andconnect the strap to the ESD point on the chassis or to an outside ESD point if thedevice is disconnected from earth ground.136PowerConnect J-SRX240 Services Gateway Hardware Guide
