Configuring Basic System PropertiesTo configure basic system properties:1. In the J-Web interface, select Configure> System properties and select the requiredtab and proceed with configuring the other settings. Table 31 on page 78 providesthe summary of configuration details for initial setup.Table 31: Basic Configuration SummaryYour ActionFunctionFieldIdentificationType the hostname.Defines the hostname of theservices gateway.Host NameType the domain name.Defines the network orsubnetwork that the servicesgateway belongs to.Domain NameType a plaintext passwordthat the system encrypts.NOTE: After a rootpassword has beendefined, it is required whenyou log into the J-Web userinterface or the CLI.Sets the password that user rootcan use to log into the servicesgateway.Root Password (required)Retype the password.Verifies the root password hasbeen typed correctly.Verify Root Password (required)Add an IP address byselecting it in the box tothe left of the Add button,then clicking Add.Delete an IP address byclicking it in the box abovethe Add button, thenclicking Remove.Specifies a DNS server that theservices gateway can use toresolve hostnames intoaddresses.DNS Name ServersAdd a domain name bytyping it in the box to theleft of the Add button, thenclicking Add.Delete a domain name byclicking it in the box abovethe Add button, thenclicking Remove.Adds each domain name thatincludes the services gateway tothe configuration so that eachdomain is included in a DNSsearch.Domain SearchManagement Access78PowerConnect J-SRX240 Services Gateway Hardware Guide
