Table 10: J-SRX240 Services Gateway Front Panel Components (continued)UsageDescriptionComponentThe HA LED can be used to determine if thechassis clustering is enabled on the device.The HA LED has the following indicator colors:• Green and steadily on indicates that all HAlinks are available.• Red and steadily on indicates that the HAlinks are not working as expected.• Amber and steadily on indicates that someHA links are not working as expected.• Off indicates that HA is not enabled.HA LEDThe Mini-PIM LED can be used to determine ifthe Mini-PIM is present and detected by thedevice.Each Mini-Physical Interface Module (Mini-PIM)LED has the following indicator colors:• Green and steadily on indicates that theMini-PIM is functioning normally.• Off indicates that the Mini-PIM is not presentor not detected by the device.Mini-PIM LEDEthernet Port LEDsOn the J-SRX240 Services Gateway, each Gigabit Ethernet port has the two LEDs asshown in Figure 7 on page 16.Figure 7: J-SRX240 Services Gateway Port LEDsTable 11: J-SRX240 Services Gateway Port LEDsLEDNumberPoE (Power over Ethernet) LED1TX/RX/Link LED2NOTE: The PoE LED is enabled only on the PoE variant of the J-SRX240 ServicesGateway. For non-PoE services gateways, the PoE LED remains off.16PowerConnect J-SRX240 Services Gateway Hardware Guide
