7. Align the processor with the socket keys.CAUTION: Do not use force to seat the processor. When the processor is positionedcorrectly, it engages easily into the socket.8. Align the pin-1 indicator of the processor with the triangle on the socket.CAUTION: Do not use force to seat the processor. When the processor is positionedcorrectly, it engages easily into the socket.9. Place the processor on the socket such that the slots on the processor align with the socket keys.10. Close the processor shield.11. Lower the close first socket-release lever near the lock icon and push it under the tab to lock it.12. Similarly, lower the open first socket-release lever near the unlock icon and push it under the tabto lock it.Next stepsNOTE: Ensure that you install the heat sink after you install the processor. The heat sink is necessaryto maintain proper thermal conditions.1. Install the heat sink.2. If removed, reinstall the PCIe expansion card riser.3. If disconnected, reconnect the cables to the expansion card(s).4. While booting, press F2 to enter System Setup and verify that the processor information matches thenew system configuration.5. Run the system diagnostics to verify that the new processor operates correctly.Related LinksSafety instructionsBefore working inside your systemRemoving an expansion card from expansion card riser 2 or 3Removing an expansion card from the expansion card riser 1Removing the cooling shroudRemoving a heat sinkInstalling a heat sinkInstalling the cooling shroudInstalling an expansion card into the expansion card riser 2 or 3Installing an expansion card into the expansion card riser 1After working inside your systemInstalling a heat sinkPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.1. Follow the safety guidelines listed in the Safety instructions section.2. Keep the Phillips #2 screwdriver ready.116
