Steps1. Press the release tab and slide the card holder toward the back of the chassis to release the PCIecard holder from the chassis.2. Lift the PCIe card holder out of the chassis.NOTE: To ensure proper system cooling, you must replace the PCIe card holder.Figure 44. Removing the PCIe card holder1. PCIe card holder 2. release tabNext steps1. Replace the PCIe card holder.2. If removed, install the full-length PCIe card.3. Follow the procedure listed in the After working inside your system section.Related LinksSafety instructionsBefore working inside your systemRemoving an expansion card from expansion card riser 2 or 3Installing the PCIe card holderInstalling an expansion card into the expansion card riser 2 or 3After working inside your systemInstalling the PCIe card holderPrerequisites1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.CAUTION: Do not use your system without the PCIe card holder installed. The PCIe card holder isnecessary to ensure proper system cooling.119
