Installing the Trusted Platform ModulePrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.Steps1. Locate the Trusted Platform Module (TPM) connector on the system board.NOTE: To locate the TPM connector on the system board, see the System board connectorssection.2. Align the edge connectors on the TPM with the slot on the TPM connector.3. Insert the TPM into the TPM connector such that the plastic bolt aligns with the slot on the systemboard.4. Press the plastic bolt until the bolt snaps into place.Figure 88. Installing the TPM1. TPM 2. TPM connector3. slot on the TPM connector 4. plastic bolt5. slot on the system boardNext steps1. Install the system board.2. Follow the procedure listed in the After working inside your system section.Related LinksSafety instructionsBefore working inside your systemSystem board jumpers and connectors175
