Viewing System SetupTo view the System Setup screen, perform the following steps:1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finishbooting, and then restart your system and try again.Related LinksSystem SetupSystem Setup detailsSystem Setup detailsThe System Setup Main Menu screen details are explained as follows:Option DescriptionSystem BIOS Enables you to configure BIOS settings.iDRAC Settings Enables you to configure iDRAC settings.The iDRAC settings utility is an interface to set up and configure the iDRACparameters by using UEFI (Unified Extensible Firmware Interface). You can enableor disable various iDRAC parameters by using the iDRAC settings utility. For moreinformation about this utility, see Integrated Dell Remote Access Controller User’sGuide at Dell.com/idracmanuals.Device Settings Enables you to configure device settings.Related LinksSystem SetupViewing System SetupSystem BIOSYou can use the System BIOS screen to edit specific functions such as boot order, system password,setup password, set the RAID mode, and enable or disable USB ports.Related LinksSystem BIOS Settings detailsBoot SettingsNetwork SettingsSystem InformationMemory SettingsProcessor SettingsSATA SettingsIntegrated DevicesSerial CommunicationSystem Profile SettingsMiscellaneous Settings45
