Removing an internal SD cardPrerequisites1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen ofSystem Setup, the information is replicated from one SD card to another.NOTE: Temporarily label each SD card with its corresponding slot number before removal. Re-install the SD card(s) into the corresponding slots.StepsLocate the SD card slot on the internal dual SD module and press the card to release it from the slot.Next stepsFollow the procedure listed in the After working inside your system section.Related LinksSafety instructionsBefore working inside your systemAfter working inside your systemInstalling an internal SD cardPrerequisites1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.NOTE: To use an SD card with your system, ensure that the Internal SD Card Port is enabled inSystem Setup.NOTE: Temporarily label each SD card with its corresponding slot number before removal. Re-install the SD card(s) into the corresponding slots.Steps1. Locate the SD card connector on the internal dual SD module. Orient the SD card appropriately andinsert the contact-pin end of the card into the slot.NOTE: The slot is keyed to ensure correct insertion of the card.2. Press the card into the card slot to lock it into place.146
