Changing the thermal settingsThe iDRAC settings utility enables you to select and customize the thermal control settings for yoursystem.1. Click iDRAC Settings → Thermal.2. Under SYSTEM THERMAL PROFILE → Thermal Profile, select one of the following options:• Default Thermal Profile Settings• Maximum Performance (Performance Optimized)• Minimum Power (Performance per Watt Optimized)3. Under USER COOLING OPTIONS, set the Fan Speed Offset, Minimum Fan Speed, and CustomMinimum Fan Speed.4. Click Back → Finish → Yes.Related LinksiDRAC Settings utilityDevice SettingsDevice Settings enables you to configure device parameters.Related LinksSystem BIOSDell Lifecycle ControllerDell Lifecycle Controller (LC) provides advanced embedded systems management capabilities includingsystem deployment, configuration, update, maintenance, and diagnosis. LC is delivered as part of theiDRAC out-of-band solution and Dell system embedded Unified Extensible Firmware Interface (UEFI)applications.Related LinksEmbedded system managementEmbedded system managementThe Dell Lifecycle Controller provides advanced embedded systems management throughout thesystem’s lifecycle. The Dell Lifecycle Controller can be started during the boot sequence and canfunction independently of the operating system.NOTE: Certain platform configurations may not support the full set of features provided by the DellLifecycle Controller.For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware,and deploying the operating system, see the Dell Lifecycle Controller documentation at Dell.com/idracmanuals.Related LinksDell Lifecycle Controller70
