Denon AVR-1602 Operating Instructions Manual

Also see for AVR-1602: Operating instructions Operating instructions Brochure & specs User manual

Contents

ENGLISH167 Set the various surround parameters.ON OFFCINEMA EQ OFFor or• CINEMA EQ settingON OFFPANORAMA OFFor or• PANORAMA setting0 3 6DIMENSION 3or or• DIMENSION setting0CENTER WIDTH O4 7or or• CENTER WIDTH settingYes Y/N NoDEFAULT Y/Nor or• DEFAULT settingSelect “Yes” to reset to the factory defaults.Stop pressing buttons once you have completedsetting the surround parameters. After severalseconds the normal display reappears and thesettings you have made are automatically set.NOTE:• When making parameter settings, the display willreturn to the regular condition several secondsafter the last button was pressed and the settingwill be completed.Surround parameters qPro Logic II Mode:The Cinema mode is the standard required modefor all A/V systems.The Music mode is recommended as the standardmode for autosound music systems (no video),and is optional for A/V systems.The Pro Logic mode offers the same robustsurround processing as original Pro Logic in casethe source contents is not of optimum quality.Select one of the modes (“Cinema”, “Music” or“Pro Logic”).Panorama Mode:This mode extends the front stereo image toinclude the surround speakers for an exciting“wraparound” effect with side wall imaging.Select “OFF” or “ON”.Dimension Control:This control gradually adjust the soundfield eithertowards the front or towards the rear.The control can be set in 7 steps from o to 6.Center Width Control:This control adjust the center image so it may beheard only from the center speaker; only from theleft/right speakers as a phontom image; or from allthree front speakers to varying degrees.The control can be set in 8 steps from 0 to 7.Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)1 Select the input source.DVD/VDP3(Main unit) (Remote control unit)q Select an input source set to digital (COAXIAL/OPTICAL) (see page 10).Playback with a digital input8(Main unit) (Remote control unit)w Set the input mode to “AUTO” or “DTS”.2 Select the Dolby/DTS Surround mode.SURROUNDMODEWhen performing this operation from the mainunit’s panel, press the SURROUND MODEbutton, then press the SELECT buttons andselect “DOLBY/DTS”.• The following appears on the display.(DOLBY PLII, DOLBY PROLOGIC, DOLBYDIGITAL, DTS)(Remote control unit)(Main unit)3 Play a program source with the , mark.• The Dolby Digital indicatorlights when playing DolbyDigital sources.DIGITALLight • The DTS indicator lights whenplaying DTS sources.LightB211 32BDVD/VDPCDTV/DBSVCRSURROUNDMODETUNER SHIFTREMOTE CONTROL UNIT RC-896STATUS MUTINGT.TONEMASTERVOLTITLEDISC SKIP+V. AUXINPUT MODE CDR / TAPECHANNEL TVCD·MD/CDR·DVD/VDPVIDEO SELECTSYSTEMSET UP MENUSELECTRETURN DISPLAYSURROUNDCH SELECTVOLUMECHANNELAVR/AVC DVD/VDPTV VCRAUDIOCD MD/CDRVIDEOPOWERTAPE·VCROFFON30026 798236 78495106273114, 5, 6, 7, 825, 6, 7, 8EX:Set the surround parameter according to the source.First, press the SURROUND button.MENUSURROUND4(Remote control unit)NOTE: Please make sure the “AUDIO” position of the slide switch on the remotecontrol unit.5 Use the (left) and (right) buttons to set the CINEMA EQ.CINEMA EQ OFF ON OFFPress the SURROUND or (down) button to switch to the D. COMP.setting.MENUSURROUND(Remote control unit)(Remote control unit)(right) button(left) button(Initial)