Denon AVR-1602 Operating Instructions Manual

Also see for AVR-1602: Operating instructions Operating instructions Brochure & specs User manual

Contents

ENGLISH18DSP surround simulation• To operate the surround mode and surround parameters from the remote control unit.1 Select the surround mode for the input channel.SURROUNDMODE(Remote control unit)The surround mode switches in the followingorder each time the SURROUND MODE buttonis pressed:STEREO 5CH STEREODOLBY PRO LOGICMONO MOVIE ROCK ARENA JAZZ CLUBVIDEO GAMEMATRIXVIRTUALSURROUNDDVD/VDPCDTV/DBSVCRSURROUNDMODETUNER SHIFTSTATUS MUTINGT.TONEMASTERVOLTITLEDISC SKIP+V. AUXINPUT MODE CDR / TAPECD·MD/CDR·DVD/VDPVIDEO SELECTSYSTEMSET UP MENUSELECTRETURN DISPLAYSURROUNDCH SELECTCHANNELTAPE·VCROFF30026 798236 784951062731232 To enter the surround parameter setting mode, press the SURROUND button.• The surround parameter switches in the following order each time theSURROUND button is pressed for the different surround modes.MENUSURROUND(Remote control unit)ROOM SIZEEFFECTDEFAULTDELAYDEFAULTEFFECTDEFAULT• ROCK ARENA• JAZZ CLUB• VIDEO GAME• MONO MOVIE • MATRIX • VIRTUALUse the (left) and (right) buttons to set the room size.ROOM SIZE MED LARGEMED-LMEDMED-SSMALL(Remote control unit)(right) button(left) buttonUse the (left) and (right) buttons to set the effect level.EFFECT LEVEL 10 15101(Remote control unit)(right) button(left) button3 Display the parameter you want to adjust, then use the (left) and(right) buttons to set it.(1) ROOM SIZE(Initial)(2) EFFECT LEVEL(Initial)Use the (left) and (right) buttons to set the delay time.DELAY 30ms 110ms30ms0ms(Remote control unit)(right) button(left) button(3) DELAY TIME(Initial)To reset the settings to the factory defaults, use the (left) and (right)buttons to display “Yes”.DEFAULT Y/N YES NO(Remote control unit)(right) button(left) buttonNOTE:• When making parameter settings, the display will return to the regular condition several seconds after thelast button was pressed and the setting will be completed.(4) DEFAULT• Operating the surround mode and surround parameters from the main unit‘s panel.1 Press the SELECT buttons to select the surroundmode.(Main unit)• When press the UP buttonSTEREO DOLBY PRO LOGIC 5CH STEREO MONO MOVIE ROCK ARENAJAZZ CLUBVIDEO GAMEMATRIXVIRTUAL SURROUNDSTEREO DOLBY PRO LOGIC 5CH STEREO MONO MOVIE ROCK ARENAJAZZ CLUBVIDEO GAMEMATRIXVIRTUAL SURROUND• When press the DOWN buttonTo select the surround mode while adjusting the surround parameters, channel volume or tone control,press the SURROUND MODE button then operate the selector.(Main unit)B1, 3212 Press the SURROUND PARAMETER button.Press and hold in the surround parameter button to select the parameter you want to set.• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes andParameters” on page 19.)(Main unit)3 Display the parameter you want to adjust, then press the SELECT UP/DOWN buttons to set it.NOTE:• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEOGAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal encodedin Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTSsignal, the mode automatically switches to DTS surround.