Denon AVR-1613 Owner's Manual

Also see for AVR-1613: Getting started Specifications Service manual Getting started

99NetworkSettings Default settings are underlined.Make settings for wired LAN.Only set “Settings” when connecting to a network without a DHCP function.Setting detailsInformationNetworkIP ControlFriendly NameSettings qDHCPSettingsIP AddressSubnet MaskDefault GatewayPrimary DNSSecondary DNSOff192. 168. 000. 001255. 255. 255. 000000. 000. 000. 000000. 000. 000. 000000. 000. 000. 000Proxyewrtyq On the menu, select “Network” – “Settings” and press ENTER.w Use ui to select “DHCP”, then press ENTER.e Use o p to select “Off”, then press ENTER.r Use ui to select “IP Address”, then press ENTER.• IP Address : Set the IP address within the ranges shown below.The Network Audio function cannot be used if other IP addresses are set.CLASS A: 10.0.0.1 – 10.255.255.254CLASS B: 172.16.0.1 – 172.31.255.254CLASS C: 192.168.0.1 – 192.168.255.254t Use uio p to input the address and press ENTER.y Use ui to select the setting item, then press ENTER.• Subnet Mask : When connecting an xDSL modem or terminal adapterdirectly to this unit, input the subnet mask indicated in the documentationsupplied by your provider. Normally input 255.255.255.0.• Default Gateway : When connected to a gateway (router), input its IPaddress.• Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentationsupplied by your provider, input it at “Primary DNS”. If there are two or more DNS addresses, inputthe first one at “Secondary DNS”.u Press o or BACK.The display returns to the original screen.• When connecting to the network via a Proxy server, select “Proxy” and press ENTER (vpage 100“Proxy settings”).Setting details• If you are using a broadband router (DHCP function), there is no need to make the settings at “IPAddress” and “Proxy”, since the DHCP function is set to “On” in this unit’s default settings.• If this unit is being used connected to a network without the DHCP function, the network settingsmust be made. In this case, some knowledge of networks is required. For details, consult a networkadministrator.• If you cannot connect to the Internet, recheck the connections and settings (vpage 18).• If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or thestore from which you purchased your computer.• When you want to cancel the setting during IP address input, press o or BACK.