Denon AVR-1613 Owner's Manual

Also see for AVR-1613: Getting started Specifications Service manual Getting started

75Quick select functionYou can save settings such as the input source selection, volumelevel, and sound mode at the QUICK SELECT 1 – 4 buttons.You can simply press one of the set QUICK SELECT buttons forsubsequent playback to switch to various saved settings all at once.• By saving frequently used settings at the QUICK SELECT 1 – 4buttons, you will always be able to easily call up the same playbackenvironment.Press QUICK SELECT.The Quick Select settings for the button you pressed are called up.• The default settings of each QUICK SELECT are as shown below.Button Input source Volume SoundModeQUICK SELECT 1 CBL/SAT 40 STEREOQUICK SELECT 2 Blu-ray 40 STEREOQUICK SELECT 3 GAME 40 STEREOQUICK SELECT 4 NETWORK 40 STEREOChanging the Quick Select NameOn this unit, you can change the Quick Select name displayed on themenu to the name that you prefer.For the name change method, see “Quick Sel.Names” (vpage 102).n Changing the settings1 Set the items below to the settings you want to save.q Input sourcez (vpage 27)w Volume (vpage 28)e Sound Mode (vpage 64)r Audyssey(Audyssey MultEQ®, Audyssey Dynamic EQ®, AudysseyDynamic Volume®) (vpage 84)2 Press and hold the desired QUICK SELECT until“Quickz Memory” appears on the display.The current settings will be memorized.z The number for the QUICK SELECT button you pressed isdisplayed.Various memory functionsPersonal memory plus functionThis function sets the settings (input mode, sound mode, HDMIoutput mode, MultEQ®, Dynamic EQ, audio delay etc.) last selectedfor the individual input sources.The surround parameters, tone settings and the volumes of thedifferent speakers are stored for the individual sound modes.Last function memoryThis function stores the settings which were made before going intothe standby mode.When the power is turned back on, the settings are restored.