Denon AVR-1613 Owner's Manual

Also see for AVR-1613: Getting started Specifications Service manual Getting started

22Detection & Measurement (Main)Set up speakers (Audyssey® Setup)4 Select “Start” and then pressENTER.The subwoofer volume setting screenis displayed.5 Select “Next” and then press ENTER.Audyssey Setup MultEQIf your subwoofer has a volume controlon it, please set it at 50%...Back NextVOLUMEMIN MAXNOTEIf “Caution!” is displayed on TV screen:Go to “Error messages” (vpage 25).Check any related items, and perform thenecessary procedures.If the problem is resolved, return and restart“Audyssey® Setup”.Going back to the previous screenSelect “Back” and then press ENTER.When measuring has stoppedq Press BACK to display the popup screen.w Press o to select “Yes”, and then press ENTER.Setting up the speakers againRepeat the operation from step 3.• This step automatically checks the speaker configuration and speakersize, and calculates the channel level, distance, and crossoverfrequency.It also corrects distortion in the listening area.6 Select “Begin Test” and then press ENTER.When measuring begins, a test tone is output from eachspeaker.• Measurement requires several minutes.7 The detected speakers are displayed.• The illustration below shows an example of when the frontspeakers, center speaker, subwoofer and surround speakers havebeen detected.Audyssey SetupRepeat Last Test NextFrontSpeaker DetectionCenterSubwooferSurroundYesYesYesYesMultEQNOTEIf a connected speaker is not displayed, the speaker may not beconnected correctly. Check the speaker connection.8 Select “Next” and then press ENTER.Preparation (Continued)