Denon AVR-1613 Owner's Manual

Also see for AVR-1613: Getting started Specifications Service manual Getting started

87VideoHDMI Setup Default settings are underlined.Make settings for HDMI video/audio output.Setting items Setting detailsAuto Lip SyncMake automaticcompensation for timingshift in audio and videooutput.On : Compensated.Off : Not compensated.HDMI Audio OutSelect HDMI audio outputdevice.AVR : Play back through speakers connected to the unit.TV : Play back through TV connected to the unit.• The audio signal input from the HDMI input connector can be output asan output signal from the HDMI output connector by setting the HDMIaudio output destination to TV.Audio signals input via the Analog/Coaxial/Optical input connectorscannot be output from the HDMI output connector.• When the HDMI control function is activated, priority is given to the TVaudio setting (vpage 73 “HDMI control function”).HDMI ControlYou can link operations withdevices connected to HDMIand compatible with HDMIControl.On : Use HDMI control function.Off : Do not use HDMI control function.• When a device that is not compatible with the HDMI control function isconnected, set “HDMI Control” to “Off”.• Please consult the operating instructions for each connected device tocheck the settings.• Refer to “HDMI control function” (vpage 73) for more informationabout the HDMI control function.NOTE• When “HDMI Control” is set to “On”, it consumes more standbypower. If you are not using this unit for an extended period, it isrecommended that you unplug the power cord from the power outlet.• The HDMI control function controls operations of a TV that is compatiblewith the HDMI control function. Make sure that the TV and HDMI areconnected when you perform HDMI control.• If the “HDMI Control” settings have been changed, always reset thepower to connected devices after the change.Setting items Setting detailsStandby SourceSets the HDMI input sourceto put into standby whenthe power is on.Last : Enters standby with the previously used input source.CBL/SAT / DVD / Blu-ray / GAME / AUX : Enters standby with each ofthe input sources assigned to each input terminal.“Standby Source” can be set when “HDMI Control” is set to “On”.P.Off ControlLinks the power standby ofthis unit to external devices.All : If power to a connected TV is turned off independently of the inputsource, power to this unit is automatically set to standby.Video : If power to a connected TV is turned off when the input sourceis CBL/SAT, DVD, Blu-ray, GAME, AUX power to this unit is automaticallyset to standby.Off : This unit does not link with power to a TV.“P.Off Control” can be set when “HDMI Control” is set to “On”.Volume Display Default settings are underlined.Sets where to display the master volume level.Setting items Setting detailsVolume Bottom : Display at the bottom.Top : Display at the top.Off : Turn display off.When the master volume display is hard to see when superimposedon movie subtitles, set to “Top”.