Denon AVR-1613 Owner's Manual

Also see for AVR-1613: Getting started Specifications Service manual Getting started

23CalculationSet up speakers (Audyssey® Setup)10 Repeat step 9, measuring positions 3 to 6.When measurement of position 6 is completed, a“Measurements Complete.” message is displayed.Audyssey SetupMeasurements Complete.CalculationMultEQRepeat Last Test11 Select “Calculation” and then press ENTER.Measuring results are analyzed, and the frequency response ofeach speaker in the listening room is determined.Audyssey SetupCalibration complete! Now Calculating...Please wait...MultEQ75%• Analysis takes several minutes to complete. The more speakersand measurement positions that there are, the more time it takesto perform the analysis.Measurement (2nd – 6th)• In this step, you will perform measurements at multiple positions(two to six positions) other than the main listening position.• Just one position can be measured but measuring multiple positionsincreases the accuracy of the correction of acoustic distortion withinthe listening area.9 Move the setup microphone toposition 2, select “Continue”,and then press ENTER.The measurement of the secondposition starts. Measurements can bemade in up to six positions.Audyssey SetupPlace the microphone at ear level at 3rdListening position.ContinueCalculationMultEQ XTRepeat Last TestAudyssey SetupPlace the microphone at ear level at 2ndListening position.ContinueCalculationMultEQ• To skip measuring the third and subsequent listening position, useui to select “Calculation” and press ENTER to proceed to step12.• To measure the second position again, use ui to select “RepeatLast Test” and press ENTER.