Denon AVR-1613 Owner's Manual

Also see for AVR-1613: Getting started Specifications Service manual Getting started

95Setting items Setting detailsLevelsSet the volume of the testtone to be the same when itis output from each speaker.Test Tone Start : Output test tone.• Front L / Center / Front R / Surround R / Surround L / Subwoofer :Select speaker to output test tone.• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.When “Levels” is adjusted, the adjusted values are set for all the soundmodes.NOTE• Speakers set to “None” in the “Speaker Config.” (vpage 94)settings are not displayed.• When a headphones jack is inserted in the PHONES jack of this unit, the“Levels” is not displayed.Set Defaults : The “Levels” settings are returned to the default settings.• Yes : Reset to the defaults.• No : Do not reset to the defaults.When you select “Set Defaults” and pressENTER, the “Reset to the default values?”prompt is displayed. Select either “Yes” or“No”, and press ENTER.SpeakersSetting items Setting detailsDistancesSet distance from listeningposition to speakers.Measure beforehand thedistance from the listeningposition to each speaker.Unit : Set the unit of distance.• Feet / MetersStep : Set the minimum variable width of the distance.• 1ft / 0.1ft• 0.1m / 0.01mSet Defaults: The “Distances” settings are returned to the defaultsettings.• Yes : Reset to the defaults.• No : Do not reset to the defaults.When you select “Set Defaults” and pressENTER, the “Reset to the default values?”prompt is displayed. Select either “Yes” or“No”, and press ENTER.Front L / Front R / Center / Subwoofer / Surround L / Surround R :Select speaker for distance setting.• 0.0ft – 60.0ft / 0.00m – 18.00m : Set the distance.• Default settings :Front L / Front R / Center / Subwoofer : 12.0 ft (3.60 m)Surround L / Surround R : 10.0 ft (3.00 m)• Set the difference in the distance between the speakers to less than20.0 ft (6.00 m).NOTESpeakers set to “None” in “Speaker Config.” (vpage 94) are notdisplayed.