Denon AVR-1613 Owner's Manual

Also see for AVR-1613: Getting started Specifications Service manual Getting started

91Source RenameChange the display name of the selected input source.This is convenient when the input source name of your device and the input source name of this unit aredifferent. You can change the name to suit your needs. When the renaming is completed, the name isdisplayed on this unit’s display and on the menu screen.Setting detailsCBL/SAT / DVD / Blu-ray / GAME / AUX / TV AUDIO : Change the display name of the selected inputsource.• Up to 12 characters can be input.• For character input, see page 79.Set Defaults : The input source name is returned to the default setting.• Yes : Reset to the defaults.• No : Do not reset to the defaults.If you select “Set Defaults” and press ENTER, the message “Reset to thedefault values?” is displayed. Select “Yes” or “No”, and then press ENTER.Hide Source Default settings are underlined.Remove from the display input sources that are not used.Setting detailsCBL/SAT / DVD / Blu-ray / GAME / AUX / iPod/USB / FM / NETWORK / TV AUDIO : Select inputsource that is not used.• Show : Use this source.• Hide : Do not use this source.NOTEInput sources set to “Hide” cannot be selected using the input source select button.InputsSource Level Default settings are underlined.• This function corrects the playback level of the selected input source’s audio input.• Make this setting if there are differences in the input volume levels between the different sources.Setting details–12dB – +12dB (0dB)The analog input level and digital input level can be adjusted independently for input sources forwhich “DIGITAL” is assigned at “Digital Assign” (vpage 90).Input Select Default settings are underlined.Set the audio input mode and decode mode of each input source.The input modes available for selection may vary depending on the input source.Setting items Setting detailsInput ModeSet the audio input modesfor the different inputsources.It is normally recommendedto set the audio input modeto “Auto”.Auto : Automatically detect input signal and perform playback.HDMI : Play only signals from HDMI input.Digital : Play only signals from digital input.Analog : Play only signals from analog input.• “Digital” can be set for input sources for which “DIGITAL” is assignedat “Digital Assign” (vpage 90).• If the input source is set to “CBL/SAT” or “DVD”, it can be set to“Analog”.• When digital signals are properly input, the indicator lights onthe display. If the indicator does not light, check “Digital Assign”(vpage 90) and the connections.• If “HDMI Control” is set to “On” and a TV compatible with the ARC isconnected via the HDMI MONITOR connectors, the input mode whoseinput source is “TV” is fixed to ARC.