Denon AVR-2312CI Owner's Manual

Also see for AVR-2312: Service manual Protocol guide Getting started

99AUDIO/VIDEO ADJUSTManual EQ Default settings are underlined.Use the graphic equalizer to adjust the tone of each speaker.“Manual EQ” can be set when “MultEQ® XT” setting (vpage 98) is “Manual”.Setting items Setting detailsCurve CopyCopy “Audyssey Flat” curvefrom MultEQ® XT.Yes : Copy.No : Do not copy.• “Curve Copy” is displayed after Audyssey® Auto Setup has beenperformed.• When you select “Curve Copy” and press ENTER, the “Set EQ curve toAudyssey Flat?” prompt is displayed. Select either “Yes” or “No”, andpress ENTER.DefaultThe “Manual EQ” settingsare returned to the defaultsettings.Yes : Reset to the defaults.No : Do not reset to the defaults.When you select “Default” and press ENTER,the “Return all settings to the default?”prompt is displayed. Select either “Yes” or“No”, and press ENTER.Adjust ChannelCorrect the tone of eachspeaker.q Select the speaker tone adjustment method.All : Adjust the tone of all speakers together.L/R : Adjust the tone of left and right speakers together.Each : Adjust the tone of each speaker.w Select the speaker.e Select the adjustment frequency band.63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz• Select the speakers you want to adjust when “L/R” or “Each” isselected.r Adjust the level.–20.0dB – +6.0dB (0.0dB)RESTORERCompressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce theamount of data by eliminating signal components that are hard for the human ear to hear. The RESTORERfunction generates the signals eliminated upon compression, restoring the sound to conditions near thoseof the original sound before compression. It also corrects the sense of volume of the bass to obtain richersound with compressed audio signals.Setting detailsOFF : Do not use RESTORER.Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.• This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is input.• “RESTORER” settings are stored for each input source.• This item default setting for “iPod” and “NET/USB” is “Mode3”. All others are set to “OFF”.• When set to something other than “OFF”, is displayed.• This cannot be set when the surround mode is set to “DIRECT” or “PURE DIRECT”.Audio Delay Default settings are underlined.While viewing video, manually adjust the time to delay audio output.Setting details0ms – 200ms• This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” is set to “ON” and whena TV compatible with Auto Lip Sync is connected.• Store “Audio Delay” for each input source.• Audio Delay for game mode can be set when “Video Mode” (vpage 89) is set to “Auto” or“Game”.