Denon AVR-2312CI Owner's Manual

Also see for AVR-2312: Service manual Protocol guide Getting started

79Playback in ZONE2 (Separate room)• You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room wherethe unit is located).• You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can alsoplay back separate sources in the MAIN ZONE and ZONE2.The source selected for ZONE2 is also output from the recording output connectors.Audio outputThere are two methods to do this, as described below. Choose one of the methods.q Zone playback by speaker outputw Zone playback by audio output (PRE OUT)Use an external amplifier.q Zone playback by speaker outputThe ZONE2 audio signals are output from this unit’s SURR.BACK/AMP ASSIGN speaker terminals usingthe amplifier assignment function.n Connecting and setting the speakers“Amp Assign” setting (vpage 102)and audio signals output Connecting the speakersZONE2 ZONE2 Output signal :Stereo (L / R)ZONE2w q w q(L) (R)w Zone playback by audio output (PRE OUT)n Audio connections (ZONE2)The audio signals of this unit’s ZONE2 audio output terminals are output to the ZONE2 amplifiers andplayed on these amplifiers.AUX INRLMAIN ZONEZONE2This unitWe recommend using high quality pin-plug cables for audio connections in order to prevent noise.NOTE• It is not possible to play the digital audio signals input from the HDMI, COAXIAL or OPTICAL connectorsin ZONE2.Use analog connections for ZONE2 playback.• When certain digital signals are being input, noise may be output from the ZONE2 audio output connectors.