Denon AVR-2312CI Owner's Manual

Also see for AVR-2312: Service manual Protocol guide Getting started

68n HDMI control function (vpage 68)n Sleep timer function (vpage 69)n Adjusting the volume of the speakers(vpage 70)n Quick select function (vpage 71)n REC OUT mode (vpage 72)n AirPlay (vpage 73)n Party mode function (vpage 74)n Zone Management function (vpage 75)n Operating a media controller to play music and stillpictures (vpage 76)n Web control function (vpage 77)n Various memory functions (vpage 78)Playback (Basic operation) (vpage 26)Settings (vpage 19)Selecting a listening mode (SURROUND MODE)(vpage 52)Playback (Advanced operation)Convenient functionsHDMI control functionIf you connect the unit and an HDMI control function compatible TV orplayer with an HDMI cable and then enable the HDMI control functionsetting on each device, the devices will be able to control each other.n Operations possible by HDMI control• This unit power off can be linked to the TV power off step.• You can switch audio output devices with a TV operation.When you set “Output audio from amp” in the TV audio outputsetup operation, you can switch the amp power on.• You can adjust this unit volume in the TV volume adjustmentoperation.• You can switch this unit input sources through linkage to TVinput switching.• When playing the player, this unit input source switches to thesource for that player.• If you switch the input source of the unit to “TV”, you canplay TV audio with this unit (vpage 7 “About ARC (AudioReturn Channel) function”).• When “HDMI Control” – “Control” (vpage 106) in the menuis set to “ON”, signals input to the HDMI input connector areoutput to the television or other device connected to the HDMIoutput connector, even if the power of this unit is in standby(pass-through function).• To play the audio of a TV that does not support the ARC functionwith the unit, connect the TV with an optical digital connection.• To use the pass-through function, connect an HDMI connectiondevice that is compatible with HDMI control.n Setting procedure1 Set the HDMI output connector corresponding withthe HDMI control function.Set “HDMI Control” – “Control” (vpage 106) to “ON“.2 Turn the power on for all the devices connected byHDMI cable.3 Set the HDMI control function for all devicesconnected by HDMI cable.• Please consult the operating instructions for the connected devicesto check the settings.• Carry out steps 2 and 3 should any of the devices be unplugged.4 Switch the television input to the HDMI inputconnected to this unit.5 Switch this unit input to the HDMI input source andcheck if the picture from the player is ok.6 When you turn the TV’s power to standby, checkthat the power of this unit also goes to standby.If the HDMI control function does not operate properly, check thefollowing points.• Is the TV or player compatible with the HDMI control function?• Is “HDMI Control” – “Control” (vpage 106) set to “ON”?• Is “Power Off Control” (vpage 106) set to “All” or “Video”?• Are the HDMI control function settings of all devices correct?