88SOURCE SELECTSetting items Setting detailsHDMISet this to change the HDMIinput connectors assignedto the input sources.BD DVD TVSAT/CBL DVRGAME1 GAME2 V.AUXDOCKHDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 / HDMI 7None : Do not assign an HDMI input connector to the selected inputsource.• At time of purchase, the settings of the different input sources are asshown below.Input source BD DVD TV SAT/CBL DVRDefaultsettingHDMI1HDMI2 None HDMI3HDMI4Input source GAME1 GAME2 V.AUX DOCKDefaultsettingHDMI5HDMI6HDMI7 None• An input source to which an HDMI input connector cannot be assignedis displayed as “– – –”.• To play the video signal assigned at “HDMI” combined with the audiosignal assigned at “Input Assign“ – “Digital”, select “Digital” at “InputMode” (vpage 91).• The audio signals input from the analog and digital connectors are notoutput to the monitor.• When a control dock for iPod is connected, signals cannot be assignedto the HDMI connectors.• When “HDMI Control” – “Control” (vpage 106) is set to “ON”,HDMI input connector cannot be assigned to “TV”.Input AssignExamples of “Input Assign” menu screen displaysThis screen appears when the “SOURCE SELECT” – “each input source” – “Input Assign” menu isselected. Use the “Input Assign” menu to change the w HDMI input connectors, e Digital inputconnectors, and r component input connectors that are assigned to the q input sources in defaultsettings.HDMI1HDMI2NoneHDMI3HDMI4HDMI5HDMI6NoneCOAX1OPT1COAX2OPT2NoneNoneNoneCOMP1NoneCOMP2NoneNoneNoneINPUT ASSIGN [1/2]HDMI DIGITAL COMPRETURN ReturnEnterSelectChange HDMI input connector assignmentDefaultBDDVDTVSAT/CBLDVRGAME1GAME2ewq rInput assignments menu operations1 Use uio p to move the highlight to the item you want to set.2 Press ENTER, then use o p to select the input connector to beassigned.3 Press ENTER to register the setting.