Denon AVR-2312CI Owner's Manual

Also see for AVR-2312: Service manual Protocol guide Getting started

112SYSTEM SETUPZONE2 Setup Default settings are underlined.Set the audio to play back with multi-zone (ZONE2).• “ZONE2” is displayed when “ZONE2” is selected with “Amp Assign” (vpage 102).Setting items Setting detailsBassAdjust low frequency range(bass).–10dB – +10dB (0dB)TrebleAdjust high frequency range(treble).–10dB – +10dB (0dB)HPFMake settings for cuttingthe low range to reducedistortion in the bass.ON : The low range is attenuated.OFF : The low range is not attenuated.Lch LevelAdjust the left channeloutput level.–12dB – +12dB (0dB)The “Lch Level” can be set when “Channel“ (vpage 112) is set to“Stereo“.Rch LevelAdjust the right channeloutput level.–12dB – +12dB (0dB)The “Rch Level” can be set when “Channel“ (vpage 112) is set to“Stereo“.ChannelSet the signal output frommulti-zone (ZONE2).Stereo : Select stereo output.Mono : Select mono output.Volume LevelSet the volume output level.Variable : Volume adjustment is enabled by main unit and remote controlunit.–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by externalamplifier.0dB (81) : Fix volume at 0 dB. Set when adjusting volume by externalamplifier.When “Amp Assign” (vpage 102) is set to “ZONE2”, the “VolumeLevel” setting is automatically set to “Variable”.Volume LimitMake a setting formaximum volume.OFF : Do not set a maximum volume.–20dB (61) / –10dB (71) / 0dB (81)This is displayed from 0 to 99 when “Volume Display” (vpage 113)is set to “Absolute”.Setting items Setting detailsPower On LevelDefine the volume settingthat is active when thepower is turned on.Last : Use the memorized setting from the last session.– – – (0) : Always mute when power is turned on.–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.This is displayed from 0 to 99 when “Volume Display” (vpage 113)is set to “Absolute”.Mute LevelSet the amount ofattenuation when mutingis on.Full : The sound is muted entirely.–40dB : The sound is attenuated by 40 dB down.–20dB : The sound is attenuated by 20 dB down.