122AppendixTipsSettingsConnectionsContentsFront panel Display Rear panel IndexRemotePlaybackPlayback in ZONE2MUTEZONE2 POWERVOLUMEXdf:Input sourceselect buttons1 Press ZONE2 to switch the zone mode to the ZONE2.2 Press POWER X to turn on the ZONE2 power.The ( indicator on the display lights.• Also press input source select button when in standby mode, thepower turns on.• When POWER X is pressed, ZONE2 turns off.• Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit.3 Press the input source select button to select the inputsource to be played.The audio signal of the selected source is output to ZONE2.• To perform an operation with the main unit, press ZONE2SOURCE.Each time you press ZONE2 SOURCE, the input source changes.2 Adjusting the volumeUse VOLUME df to adjust the volume.• At time of purchase, “Volume Limit” (vpage 173) is set to “70(–10dB)”.%• Turn MASTER VOLUME after pressing ZONE2 SOURCE on the main unit toadjust the sound volume.
